Isotherm Imaging

Home / Services

Services

Four thermal services and three aerial services, each delivered with a written report. Electrical and heat-loss scans start in late January 2027; drone services start in spring 2027.

Thermal imaging · handheld

Electrical panels and switchgear

From January 2027

A loose, corroded or overloaded connection runs hotter than it should long before it fails. An infrared scan finds those hot spots while equipment is running under load, so they can be fixed during planned maintenance instead of during an outage.

Scans are done alongside your electrician, who removes covers and opens enclosures. Isotherm Imaging does not touch energized equipment or make repairs.

What it finds

  • Loose or corroded terminations
  • Overloaded or unbalanced circuits
  • Failing breakers, fuses and contacts
  • Hot spots on transformers and busway

Typical equipment

  • Panelboards and switchboards
  • Switchgear and MCCs
  • Disconnects and transfer switches
  • Dry-type transformers

You receive

  • Report with every finding rated
  • Thermal and visible images
  • List of equipment scanned
  • Recommended next scan date

NFPA 70B calls for infrared inspection of most electrical equipment at least once a year, and many insurers ask for it. Annual scan schedules are available.

Request an electrical scan quote

Thermal imaging · handheld

Building heat loss

From January 2027

A heat-loss survey shows where conditioned air and heat escape a building: missing or settled insulation, air leaks around windows and penetrations, and thermal bridges through the structure. It is done in cold weather, when the difference between inside and outside temperature makes these problems visible.

What it finds

  • Missing or compressed insulation
  • Air leakage at openings and joints
  • Thermal bridging at slabs and framing
  • Moisture in wall assemblies

Good for

  • Energy retrofit planning
  • Comfort complaints
  • New construction quality checks
  • Before and after comparisons

You receive

  • Report with annotated images
  • Findings by location and priority
  • Recommended corrections
  • Conditions recorded at the time

Request a heat-loss survey quote

Thermal imaging · drone

Flat roof moisture

From spring 2027

Wet insulation under a low-slope roof holds the day's heat longer than dry insulation. Flown in the evening after a clear, dry day, a thermal survey maps those wet areas across the whole roof, so you can confirm them with a few cores and repair only what is wet instead of replacing the roof.

What it finds

  • Wet insulation under the membrane
  • Leak paths around drains and curbs
  • Extent of past leak damage

Good for

  • Repair or replace decisions
  • Pre-purchase due diligence
  • Warranty and insurance claims

You receive

  • Moisture map over a roof plan
  • Suggested core locations
  • Estimated wet area in square feet

Request a roof survey quote

Thermal imaging · drone

Solar arrays

From spring 2027

A thermal flight over a rooftop or ground-mounted array shows every module that is underperforming: hot cells, failed bypass diodes, cracked glass and strings that are not producing at all. A drone covers in an hour what would take a crew days on foot.

What it finds

  • Hot cells and hot spots
  • Bypass diode failures
  • Offline strings and modules
  • Soiling and shading patterns

Good for

  • Commissioning checks
  • Before warranty deadlines
  • After hail or storms
  • Annual O&M inspections

You receive

  • Fault list with module locations
  • Thermal and visible images
  • Fault map over the array layout

Request a solar inspection quote

Aerial imaging · drone

Facades

From spring 2027

Close, high-resolution imagery of every elevation, captured on a planned grid so each image can be located on the building. Engineers and architects use it to plan hands-on inspections, document conditions for facade ordinance filings and track change between cycles.

The licensed engineer or architect leads the inspection and signs any filing. Isotherm Imaging supplies the imagery.

What it shows

  • Cracking, spalling and displacement
  • Failed sealant and flashing
  • Staining and water paths
  • Optional thermal imagery of the envelope

Good for

  • Facade ordinance cycles
  • Pre-repair scoping
  • Condition baselines

You receive

  • Images organized by elevation and grid
  • Index sheet linking images to locations
  • Raw files at full resolution

Request facade imagery

Aerial imaging · drone

Bridges, culverts and parking garages

From spring 2027

Imagery of structural elements that are hard or expensive to reach: bearings, girders, abutments, culvert headwalls and the exterior of parking structures. Flights are planned with the engineer so the images match the inspection's element list and naming.

The engineer's qualified team leader directs the inspection and makes the condition ratings.

What it shows

  • Cracking, spalling and exposed steel
  • Section loss and corrosion
  • Scour and debris at culverts

Good for

  • Routine inspection support
  • Reducing lane closures and lifts
  • Post-event documentation

You receive

  • Images named to your element list
  • Location sketch for each image set
  • Raw files at full resolution

Request structure imagery

Aerial imaging · drone

Construction progress

From spring 2027

Scheduled flights that capture the site from the same viewpoints each visit, so owners, lenders and project teams can compare progress month to month. Delivered within two business days of each flight.

What it covers

  • Fixed-angle photo sets
  • Overview video
  • Optional site maps

Good for

  • Owner and lender reports
  • Marketing and project records
  • Dispute documentation

You receive

  • Dated, labeled photo sets
  • Shared folder for the whole project
  • Same viewpoints every visit

Request a progress flight quote

Not sure which service fits?

Describe the building or site and the problem you are trying to solve. You will get a recommendation and a quote.

Request a quote